by Tyler Drever | Oct 7, 2020 | Axles, FAQ
Spring Axles The generally accepted measurements that define spring axles are hub face, spring center, and overhang. Hub face is a measurement that defines the space between the outside faces of the hub. This is the face that the bolts protrude from, and the wheel...
by Tyler Drever | Sep 28, 2020 | Axles, FAQ
What is Axle Camber? Are Axles Supposed to Bend? In short, yes. The “bend” in an axle is called the Camber. (This is not to be confused with V-Bend; the small downward bend in the axle’s center. Usually, done for cargo clearance, in applications like...
by Tyler Drever | Sep 25, 2020 | Axles, FAQ
What is Axle Flipping? DISCLAIMER: HSI Duratek does NOT recommend flipping trailer axles, it is very dangerous. Can Axles be Flipped? It is not recommended, but it can be done. “Flipping” is a term used to refer to taking the spring, usually mounted below the axle,...
by Tyler Drever | Sep 25, 2020 | Axles, FAQ
Image Above: Diagram of a drop axle vs. a straight axle, shown from the front. The Low-Down on Drop Axles Drop axles are similar to standard spring axles, but the spindles at the end of the tube bend up. This puts the hub higher up, generally lowering the axle closer...
by Tyler Drever | Sep 23, 2020 | Axles, FAQ
BUILDING HSI DURATEK AXLES At HSI Duratek, we know that the little details can make all the difference. In the world of trailer axles, quality, safety, and dependability are essential in making sure your trailer is always operating at it’s best. That’s why...
by Tyler Drever | Sep 17, 2020 | Axles, FAQ
AXLE SUSPENSION Torsion axles are a type of axle suspension used on trailers. Image: Diagram of a torsion axle, shown as a cross-section Torsion Axle Construction The torsion axle design features a hollow round-cornered square tube bolted directly onto the trailer...
